TITATEC / BLOG

← Back to TITATEC Blog

Convenience Store Lighting

How to Power Convenience Store Shelf Lighting When AC Outlets Are Limited

Convenience store gondola shelf lighting with one AC outlet connected to three LED drivers
Concept illustration: three shelf-lighting driver groups connected from one AC outlet.

Convenience stores often have limited AC outlets around gondola shelving. When you add shelf lighting, the nearest outlet may be far away or already in use. Installing additional outlets can mean extra wiring, electrical work, cost, and disruption to store operations.

When the existing outlet and circuit have enough capacity, a TITATEC extension cable can connect up to five compatible LED drivers to one AC outlet. This can help reduce the need to add outlets just for shelf lighting and make the power layout easier to plan.

How the extension cable helps

The extension cable connects the AC side of multiple LED drivers to one suitable outlet. Each driver continues to power its own LED shelf-lighting group. One outlet can serve several driver groups through the extension cable; the LED drivers remain separate.

TITATEC extension cable connected with three LED drivers
Example connection showing three LED drivers. The extension cable can connect up to five compatible driver groups, subject to product ratings and installation requirements.

Help avoid unnecessary outlet work

If outlet locations are limited, a new outlet may require an electrician, added wiring, and work around store fixtures. In a suitable installation, connecting multiple drivers to one existing outlet can reduce the need for that extra work.

Plan the connection for the store

First map the shelf sections to be illuminated and decide where the drivers will sit. Group up to five compatible drivers on the extension cable, then check cord reach and cable routing before installation.

Check the total load. The five-driver limit is a connection capacity, not a reduction in electrical load. Confirm the combined input load of all connected drivers and make sure it stays within the ratings of the extension cable, outlet, and branch circuit. Follow product instructions and local electrical requirements. If outlet or circuit capacity is uncertain, consult a qualified electrician.

A practical way to make shelf-lighting upgrades easier

Limited outlet access does not have to make a convenience-store shelf-lighting project more complicated. When the existing electrical capacity allows, one AC outlet can connect up to five compatible LED drivers through the TITATEC extension cable—helping store owners reduce extra outlet work and simplify installation planning.

Contact TITATEC about your shelf-lighting project →

Published on the TITATEC Blog ·